What is the difference between 150 grain and 180-grain?

What is the difference between 150 grain and 180-grain?

The 150-grain bullets also pretty well carry the same energy as 180-grain bullets. The 150s actually pack about 100 ft. more energy at the muzzle than do the 180s. At 200 yards, the 180s do nudge ahead in the energy department; however, at 500 yards that additional power is only 87 ft.

Is a 150 grain bullet good for elk?

The Bullet Does the Work We argue cartridges and calibers endlessly, but bullet choice matters. Elk bullets must be tough enough to provide adequate penetration. Choose at least medium weight for caliber: 140 grains in 6.5mm and the lighter 7mms; 140 and 150 grains in .

What grain bullet for 270 is best for deer hunting?

The 270 Winchester cartridge is a perennial favorite for deer and other big game hunters in America. With bullet weights in the 130-150 grain range, and a muzzle velocity over 3,000 fps, the 270 is a great choice for deer out to several hundred yards.

What is the best grain for 270?

The 130 and 150-grain slugs are the most popular choices for the . 270, with some 140-grain offerings splitting the difference. There are lighter choices—the 90 and 100-grain bullets that make the . 270 a viable coyote rifle—and some heavier bullets, but above 150-grains things get tricky.

Is 150-grain or 180-grain better for deer?

Registered. Would recommend 150-165 gr bullets. 180gr are heavier constructed and don’t expand as fast for deer. Elk ,moose, bears use 180gr.

Is 150-grain deer good?

Mag. The biggest buck I’ve ever killed in my life fell to a 150-grain Winchester Ballistic Silvertip out of a . 308, and that load is still a go-to for that rifle. Most rifles shoot them well, in my experience, on deer-sized game, the only real downside is a little meat damage on shoulder shots.

Is a 150 grain bullet good for moose?

The best bullet weight for moose hunting in a standard . 308 caliber rifle is going to be in the 150 to 168 grain range. The 150 will offer the best trajectory (not too much drop) and will be highly accurate.

Is 130 grain enough for elk?

Senior Member. Accubond or Partition, 130 or 140 grains, I’d shoot the one that your rifle likes and you will kill elk!

Is a 270 good for deer hunting?

270 Winchester one of the most popular big-game hunting cartridges of all time. He cemented its merit far and wide by using it to stack up big-game animals around the globe—including untold numbers of North American deer. For hunters who exclusively pursue deer, the . 270 Winchester is tough to beat.

What is the heaviest 270 bullet?

around 150 grains
Nearly all rifles chambered for 270 caliber are fitted with 1:10” twist barrels. This relatively slow twist limits the length, weight and BC of bullets that can be stabilized. Typically, the heaviest 270 bullets are around 150 grains because that is all that can be stabilized in a 1:10” twist.

What is the most accurate 270 factory ammo?

Best accuracy and all-around performance in production rifles are generally obtained by using mid-weight bullet for the caliber. For the 270, that puts us in the 130 gr. range. For whitetail, a well-constructed soft point or polymer-tipped, jacketed bullet is normally best.

Is a 270 good for mule deer?

270 Winchester is an excellent all-around cartridge for mule deer hunting, the 270 WSM is also an outstanding choice, especially for hunters who want a little better performance at longer range.

What is the best grain size for a H110?

H110 for the light stuff up to about 125, maybe the 135 grain stuff. H110 needs a high case fill percentage to not have wonky pressure curves.

What is the best bullet for a 300 Blackout?

The 110-grain Barnes TTSX bullet is a better choice for the .300 Blackout than its 130-grain cousin, but there is another lesson: If you’re loading this bullet for a faster-shooting .30 caliber, when impact velocities drop below 2,000 fps, do not expect expansion.

What is the difference between a 223 and a 300 BLK?

In the .223 it pushes the neck of the case. In 300BLK it pushes the actual bullet hence why you have to figure out where your bullet is at .250 and set that so that portion runs on the rib.

What grade ammo for Remington 300blk?

With 300blk and the light stuff you can get 22+g of powder into the case which should give a very high % case fill hence why it is better for lighter stuff. I believe the lighter remington factory ammo uses H110 (or the canister grade equivalent).