How do you convert mmHg to PSI?

How do you convert mmHg to PSI?

A millimetres of mercury column pressure value can be displayed in pounds per square inch pressure units with the following conversion factor:

  1. 1 psi = 6,894.76 pascals (Pa)
  2. 1 mmHg = 133.322 pascals (Pa)
  3. psi value x 6,894.76 Pa = mmHg value x 133.322 Pa.
  4. psi value = mmHg value / 51.7149.

What is 1 atm of pressure equal to in mmHg?

760 mm Hg
1 atm = 101,325 Pascals = 760 mm Hg = 760 torr = 14.7 psi.

What is the PSI of 1 atm?

14.69595 psi
The standard atmosphere (symbol: atm) is a unit of pressure defined as 101,325 Pa….Standard atmosphere (unit)

Atmosphere
1 atm in … … is equal to …
SI units 101.325 kPa
US customary units 14.69595 psi
other metric units 1.013250 bar

Is 1 mmHg the same as 760 atm?

A barometer measures gas pressure by the height of the column of mercury. One unit of gas pressure is the millimeter of mercury (mmHg). Standard atmospheric pressure is called 1 atm of pressure and is equal to 760 mmHg and 101.3 kPa.

How do you convert mmHg to ATM?

The atmosphere (atm) unit is commonly used for referencing the average atmospheric pressure at sea level. One millimeter of mercury is equal to 0.0013157896611399 atmospheres. This means that to convert mmHg to atm you should multiply your figure by 0.0013157896611399.

How do you calculate pressure in mmHg?

The conversion calculation from inches of mercury column to millimetres of mercury column over the vacuum and atmospheric pressure range is as follows: 1 mmHg = 133.322 pascals (Pa) 1 inHg = 3386.39 pascals (Pa) mmHg value x 133.322 Pa = inHg value x 3386.39 Pa. mmHg value = inHg value x 25.4.

How do you convert atm to mmHg?

One atm. equals 760.0 mm Hg, so there will be a multiplication or division based on the direction of the change. Example #1: Convert 0.875 atm to mmHg. Solution: multiply the atm value by 760.0 mmHg / atm.

How many psi are in 2 ATMS?

29.391897551 psi
Standard Atmosphere to Psi Conversion Table

Standard Atmosphere [atm] Psi [psi]
0.1 atm 1.4695948775 psi
1 atm 14.6959487755 psi
2 atm 29.391897551 psi
3 atm 44.0878463265 psi

How do you convert atm to force?

The unit of pressure in the SI system is the pascal (Pa), defined as a force of one Newton per square meter. The conversion between atm, Pa, and torr is as follows: 1 atm = 101325 Pa = 760 torr.

How do I convert ATM to Psi?

To convert atm to psi (pound force per square inch) please use the conversion tool below. Enter the pressure in atm into the converter and the result will be displayed. For all pressure unit conversions, please check pressure conversion. 1 Atm = 14.6959488 Psi. Atmospheric pressure is the force per unit area by the weight of air above that point.

What is the conversion of mmHg to Psi?

Quick conversion chart of mmHg to psi 1 mmHg to psi = 0.01934 psi 10 mmHg to psi = 0.19337 psi 20 mmHg to psi = 0.38674 psi

What is the normal range of atmospheric pressure in mmHg?

20 mmHg. 0.3867355 psi. 30 mmHg. 0.5801032 psi. 40 mmHg. 0.773471 psi. 50 mmHg. 0.9668387 psi. 75 mmHg.

How much pressure is in a square inch of mercury?

Conversion Table millimeters of mercury (mmHg) pounds per square inch (psi) 20 mmHg 0.3867355 psi 30 mmHg 0.5801032 psi 40 mmHg 0.773471 psi 50 mmHg 0.9668387 psi