How do I remove a JK transfer case?

Annals 06/29/2019

How do I remove a JK transfer case?

Registered

  1. remove drive shafts.
  2. remove 6 nuts attaching TC to Transmission (2 hold bracket and linkage)
  3. disconnect wiring harness and breather tube.
  4. Pull towards rear and remove.

What tools do I need to change a transfer case?

We can still provide a general list of tools you’ll need, regardless of which model you have.

  1. Work light.
  2. Floor jack.
  3. Jack stands.
  4. Transmission jack.
  5. Socket set.
  6. Box end wrenches.

Where is the transfer case on a Jeep?

A typical transfer case is found at the rear of the transmission and powered by the transmission output shaft, operating much like a secondary transmission unit. Most 4WD transfer cases have four modes of operation: two-high. neutral.

What does slip yoke eliminator do?

Slip Yoke and Slip Yoke Eliminator This sliding capability allows for changing length depending on the vehicle’s movements. A slip yoke eliminator, abbreviated SYE, does what the name suggests: It eliminates the slip yoke from the transfer case. Instead, it turns it into a fixed yoke that does not slide.

How Much ATF do I need for NP231?

It holds about 2 quarts. -When you have a choice, buy American.

What is the part number for a 231j transfer case?

Aftermarket modifications allow for the addition of a 2 Low position. This tag indicates a 231J transfer case, with a part number of 52099211, a build date of 6-21-99 and a gear ratio of 2.72:1.

What year did the Jeep NP 231 transfer case come out?

The Jeep NP 231 transfer case was introduced in the 1988 model year. Jeep’s YJ Wrangler and the XJ / MJ Cherokees with the Command Trac option were the first models to feature it.

What is the difference between a GMC 231 and 231j?

The 231 was initially tagged as the 231AMC, and as ownership of AMC was taken over by Chrysler, it was later designated as the 231J. This transfer case was later to be called the NVG (New Venture Gear) 231J. Despite the different nomenclature, they are essentially the same transfer case, with the bulk of their parts interchanging.

What kind of transfer case does a ZJ Jeep have?

Heavier-duty HD and DHD units are available in ZJ Jeeps and Dodge trucks, respectively. The standard duty OEM 231 transfer cases are capable of transferring from 1600 to 1900 ft. lbs of torque (as claimed by NVG – actual experience puts this number quite a bit higher).