Can I use ceratec on every oil change?

Liqui Moly recommends adding it to fresh oil during a oil change or add to existing oil when you have at least 5,000km (3,100 miles) left before an oil change. This gives the product sufficient time to coat all areas — once coated last for 50000km (31,000 miles) so it is not needed every oil change.

Is ceratec safe for DPF?

Safe with catalytic converters and particulate filters (GPF/DPF) as well as for belt-in-oil systems. motor oil. Long-term effect up to 50.000 km (30.000 miles). Shake well before use.

How long does Liqui Moly ceratec last?

Self-mixing. Sufficient for 5 liters of oil. With a long-term effect lasting around 50,000 km. Suitable for toothed belts running in oil.

Is ceratec safe for turbos?

Cera Tec is self-mixing and compatible with all standard motor oils. Also tested for vehicles with turbochargers, catalytic converters or particle filters. It is ideal for use in oil-lubricated transmissions, pumps and compressors.

What does Liqui Moly ceratec do?

CERA TEC reduces friction and wear due to ceramic compounds that withstand extremely high chemical and thermal loads. Prevents direct metal-to-metal contact, thus increasing the engine service life. The low-friction effect reduces fuel consumption in gasoline and diesel engines.

How often should I use ceratec?

We recommend using this product every 5th oil service or every 25k miles. Cera Tec reduces the amount of friction and thereby the wear. This in turn benefits the engine, which is under less load. This can result in a lower susceptibility to repair and longer service life.

Can you use ceratec and MoS2?

For a high performing engine, Liqui Moly Ceratec will be the suitable one, while Liqui-Moly MoS2 works best with the older engine.

What is Cera Tec?

Cera Tec is a suspension based on a microceramic solid lubricant and chemical active agents in mineral oil. ideally, pour in together with fresh oil when changing the oil. 300 ml is sufficient for up to 5 liters of motor oil.

What is ceratec?

CERA TEC is a high-tech ceramic wear protection product for all motor oils. CERA TEC reduces friction and wear due to ceramic compounds that withstand extremely high chemical and thermal loads. The low-friction effect reduces fuel consumption in gasoline and diesel engines.

Are Liqui Moly products any good?

It has good cold-start behavior, as well as improved wear characteristics for modern engines. LIQUI MOLY MoS2 is also recommended for older Porsches with air-cooled engines. The extra additives are very effective at reducing wear for high-heat situations, another difficulty for oil manufacturers.

Can ceratec be used in diesel engine?

Cera Tec is a high-tech ceramic wear protection product for all motor oils. The low-friction effect reduces fuel consumption in gasoline and diesel engines. It provides wear protection for engines, transmissions, pumps and compressors.

Do ceramic engine treatments work?

By coating the engine’s interior, it reduces the wear on your engine and reduces the amount of friction. This helps to make sure that the engine is able to run more efficiently for longer. A ceramic oil treatment decreases friction and helps protect your engine.

What is Cera TEC and how does it work?

CERA TEC provides wear protection for engines, transmissions, pumps and compressors. CERA TEC should be added to the oil and is self-mixing. Sufficient for 5 liters of motor oil. Provides protection up to 50,000 km.

Is Cera TEC tested by APL?

Cera Tec has been independently tested by Automobil-Prüftechnik-Landau GmbH (APL). Here’s some information from a Liqui-Moly PDF on Cera Tec (if anyone wants a copy, I can email it): CERA TEC Motor oil additive With high-tech ceramic anti-wear protection How does CERA TEC work?

Does ceratec really work?

I was planning on adding CeraTec & some of you guys suggested that I must use it. Now, oil additives are one of the highly debated topics among car guys. Many say that they don’t really work, yet an equal (or more) number of guys claim that they do work.

Does Liqui Moly ceratec work on real engines?

Well, lo and behold , Liqui Moly Ceratec had just done one on a real working engine, thanks to yours truly and all I have to say is’ thank god  this sh*t works!!’ This entry was posted in Liqui Moly, Posting by Ariffand tagged Ceratec friction test, Liqui Moly Ceratec teston June 27, 2012by skagee.