Are beer tap handles worth money?

“Common tap handles can range in price from $8 to $15 each. Scarce tap handles can bring up to $1,000. Most of my tap handles are $10 to $85.” Lohrenz has bought several of one particular tap handle because he thought they could be profitable to sell someday.

What size thread is a beer tap handle?

3/8″-16
Thanks to a miracle of modern standardization, virtually all beer faucets feature either a 3/8″-16 UNC (United States) or M10×1.5mm (everywhere else) external threaded post for mounting a faucet, which means that the only things you need for making your own handle are: Something you can drill a hole into.

How long are beer tap handles?

9-13″ tall
Typical tap handles are 9-13″ tall, but can range from very short (4″) to novelty lengths (>13″).

How much are bar taps worth?

Overall, these 12-tap systems typically start at $4,000 ($5,500 including glycol) and can cost as much as $12,000 for more deluxe models. As a general rule of thumb, you should expect to pay about $1,000 per beer line. This cost includes a long run, blended gas, and glycol.

Can you sell tap handles?

Buying Tap Handles From Breweries If a brewery offers their tap handles for sale can be a bit of a toss-up, some will only sell their tap handles online, others will only sell them at the brewery, there are a few that have them online and in their brewery and there are plenty that don’t sell them at all.

Are all beer tap handles the same size?

However, all faucet handles and faucets produced in the U.S., even if made by different manufacturers, are interchangeable as they have the U.S. beer industry standard 3/8″-16 UNC threads.

How do you make your own tap handles?

How-To Make A Wooden Beer Tap Handle

1. Step 1: Cut the wood to size.
2. Step 2: Drill space for the threaded insert.
3. Step 3: Glue and let dry.
4. Step 4: Rough turn it on the lathe.
5. Step 5: Sand to perfection.
6. Step 6: Coat in walnut oil and let drip dry.
7. Step 7: Cure the finish with friction polish.

Are Kegerator tap handles universal?

However, all faucet handles and faucets produced in the U.S., even if made by different manufacturers, are interchangeable as they have the U.S. beer industry standard 3/8″-16 UNC threads. Currently there is no adapter piece available for fitting handles with European threads to faucets with U.S. threads or vice versa.

Are all tap handles universal?

How much do beer taps go for?

Breakdown of the costs You can expect to pay $600-$800 for taps depending on how many you buy. You will need to buy a drip tray that can cost you between $250-$300. The cost of a glycol system depends on the distance of the kegs from the bar table and it can cost you between $1200 to $5300.

Can you buy beer tap handles?

Where to Buy Tap Handles. As you might have guessed already, Beverage Craft is your reliable online supplier of all things beer, including (but not limited to) beer tap handles. You can order tap handles in 3-piece and 5-piece bundles for up to 25% off the original price.