How do I contact Tplink?

Annals 05/30/2019

How do I contact Tplink?

Contact Us

Website: www.tp-link.com/us
Tel: +1 626 333 0234
Fax: +1 909 527 6803
E-mail: [email protected]
Technical Support: Contact Support

Why is my tp-link not working?

1) Check the WLAN LED indicator on your wireless router/modem, and make sure it is on or flashing. Check Wi-Fi On/Off button and make sure Wi-Fi is enabled. 3) Make sure your computer/device is still within the range of your router/modem. Try moving closer if you are currently too far away.

How do I contact TP-Link UK?

TP-LINK Contact Information

TP-Link UK Ltd
Sales phone: +44 (0)118 327 1135
Sales E-mail: [email protected]
Warranty & RMA support: [email protected]
Technical Support E-mail: [email protected] (UK) / [email protected] (Ireland)

How do I reset my tp-link wireless router?

With the Router powered on, press and hold the WPS/RESET button (more than 10 seconds) until the SYS LED becomes quick-flash from slow-flash. Then release the button and wait the Router to reboot to its factory default settings.

How do I get my TP-Link to work?

Plug your Range Extender into a power outlet near your main Router/AP. 2. Push the WPS button on your main Router/AP first, then immediately push the WPS button on your Range Extender. Note1: After you have pushed WPS button of your Router/AP, you need to push WPS button of your Range Extender within 2 minutes.

How do I connect my tp-link to the Internet?

Power on your router and computer first and then modem.

  1. Log into the router’s web-based management page.
  2. Configure WAN Connection Type.
  3. Enter your PPPoE username and password which are provided by your ISP.
  4. Click Save to save your settings, then the router will connect to Internet after a while.

How do I access my tp link router admin?

How to view System Log of TP-Link wireless Router?

  1. Open the web browser and in the address bar type in: http://192.168.1.1 or http://192.168.0.1 or http://tplinklogin.net.Then press Enter.
  2. Type the username and password in the login page. They are both admin by default.
  3. View System Log. Click System Tools->System Log.