How do you reset the toner light on a Brother printer?

To reset the ‘Toner Life End’ / ‘Replace Toner’ message on Brother DCP, MFC and HL colour printers:

1. With the printer powered on, open the toner access door.
2. Press the ‘Clear/Back’ button to get to the ‘Reset Menu’
3. At the Reset Menu you can then scroll through the reset options for your printer’s toner cartridges.

Why is the toner light on my Brother printer?

The Toner (Yellow) LED is flashing. The Drum, Paper and Ready LEDs are off. The toner cartridge is not installed correctly. Remove the drum unit, remove the toner cartridge from the drum unit, and put the toner cartridge back into the drum unit.

Why does my Brother printer keep saying no toner?

The No Toner message appears if the toner cartridge or the toner cartridge and drum unit assembly is not installed correctly. Remove the toner cartridge from the drum unit, and reinstall the toner cartridge back in the drum unit. Reinstall the toner cartridge and drum unit assembly back in the machine.

How do I reset my Brother printer TN420?

Press the “Go” button 2 times – The “Toner, Drum, and Error” LEDs will turn ON. Press the “Go” button 6 times for a TN420 or Press the “Go” button 7 times for Brother TN450. Close the front cover after “Error” LED starts to flash. Finally, The reset procedure has been completed.

How do you reset the toner light on a Brother HL L2300D?

Brother HL-L2300D Toner Reset

1. Press and Hold the Power button until the machine turns off.
2. Open the Toner Door.
3. Press and Hold the Go button until step 5.
4. Press the Power button.
5. Release the Go button when the Toner, Paper, and Drum lights are lit.
6. Press the Go button 9 times.

How do I bypass the toner on a Brother printer?

1. Power on the Brother printer.
2. Open the toner access door located at the front of the printer.
3. Press the “Clear/Back” button.
4. Scroll through the list of toner cartridges until you have located the one that is giving the “Replace Toner” message.
5. Press the “1” button to reset the toner cartridge display.

What is the difference between brother tn420 and brother tn450?

People who use Brother Printers, of which who use Brother TN-420 or Brother TN450 toner cartridges, might encounter toner error messages such as “Toner Low”, “Replace Toner” or “Toner Life End”. By the way, Brother TN450 is the high yield version toner for TN420.

What should I do if my brother toner is flashing?

If you install a new genuine Brother toner cartridge but the Toner LED is still on or flashing, or the status monitor continues to display the message Toner Low or Toner Life End, the toner cartridge may not be installed correctly. Please follow the steps below to reinstall the toner cartridge:

Can I use a partially used toner cartridge in my brother?

If you install a partially used toner cartridge, your Brother machine is unable to recognize toner consumption correctly which will cause this problem. Therefore, when you replace the toner cartridge, please use a brand new toner cartridge, not a partially used toner cartridge from another machine.

How to use tntn450 high yield toner?

TN450 high yield toner: Press the “Start” button, and press “arrow up” or “arrow down” button to display “12” on the LCD display. Then press the “OK” button. Unknown Toner Type: Press the “Start” button, and press “arrow up” or “arrow down” button to display “00” on the LCD display.