How do you reset the scanner on a HP Pro 163?

How do you reset the scanner on a HP Pro 163?

To Initialize the scanner, turn off the scanner then turn it back on. Press 0 when the welcome screen appears. ‘Please select factory tests. Exit if no key is pressed’ will briefly appear.

Is the Radio Shack Pro 163 a digital scanner?

5.0 out of 5 stars A great analog scanner with a wide frequency range. It is not digital.

Is the Radio Shack Pro 164 a digital scanner?

The pro 164 is a analog scanner not digital so please check with your city to see if this can be use there before you buy.

How do you program a Radio Shack triple trunking scanner?

  1. Press PROG, then press TRUNK.
  2. Press FUNC, then use an UP or DOWN ARROW to select a bank.
  3. Repeatedly press MODE to select a trunking mode (Motorola, EDACS,LTR).
  4. Press PROG.
  5. Enter the first control channel freq.
  6. Repeatedly press MODE to select a trunking mode (Motorola, EDACS, LTR).

How do I reset my Radio Shack Pro 164 scanner?

To initialize the scanner, turn the scanner off, turn it on again, when the welcome message comes on the display, press 0, then press 1, then ENT. “Initializing please stand by” appears for about 5 seconds. When the initialization is complete, the scanner will show Bank 0, Ch 00.

How do you program a police scanner Uniden?

Programming a Handheld Model of the Uniden Bearcat Scanner Press the “Scan” button to put the handheld into scanning mode and press “Manual” to enter manual programming mode. Your scanner will have a number of available channels that can be programmed. Enter the channel number you wish to use and press “Manual” again.

What frequency do police scanners use?

Public Safety Spectrum

Frequency MHz Available for Public Safety
25-50 MHz (VHF Low Band) 6.3 MHz
150-174 MHz (VHF High Band) 3.6 MHz [non-contiguous]
220-222 (220 MHz band) 0.1 MHz
450-470 (UHF Band) 3.7 MHz [non-contiguous]

How do I reset my Radio Shack scanner?

Make sure your scanner is turned off. While holding down 3 and E, turn on the scanner. frequencies and -LoAd- appears.

How do I upgrade the firmware on my pro-163?

Please see the Connecting scanners via USB article for USB cables to connect your PC to the scanner You can verify the version of firmware currently active in the Pro-163 by pressing the 3 key during the “Welcome” screen. Firmware upgrades can be installed by downloading and running an upgrade program.

Where was the GRE pro-163 made?

The Pro-163 was manufactured by GRE in China. The Pro-163 is very similar to the GRECOM PSR-400 and Radio Shack Pro-164 and uses the same software and cables. Note: This radio can not be computer controlled. Can be updated to support Rebanding?

What is special scanner software 7 for 1 special?

Special Scanner Software 7 FOR 1 SPECIAL Quickly and Easily Program these SIX scanners Plus get a bonus Radioshack PRO-163, PRO-164, PRO-97, Pro-2055 And GRE PSR-300 GRE PSR-400 FREE EXCLUSIVE BONUS: Don’t miss this 7 software deal for the price of one!

Is there a free bonus with arc300 scanner?

FREE EXCLUSIVE BONUS: Don’t miss this 7 software deal for the price of one! This package includes the ARC300 which programs all the above scanners plus order through this page to receive a FREE bonus: The Radio Traffic Saver(normally sold for $29.95 alone) and the Classic 1990s Scanner-Radio File Collection of over 700 files..