How do I enable RAID on HP?

Annals 09/18/2019

How do I enable RAID on HP?

When the computer turns on, before Windows opens, press the F10 key repeatedly. The BIOS opens. Select the Advanced tab, and then click System Options. Under System Options, select Configure Storage Controller for RAID and POST Prompt for RAID Configuration.

How do I check my RAID settings?

How to Guide: Checking if a RAID is configured

  1. Rick click on the “computer” icon on the desktop.
  2. Select Manage.
  3. Expand Storage.
  4. Click Disk Management.
  5. In the bottom center pane you’ll see different Disk numbers.
  6. Under the Disk number you’ll see either Basic or Dynamic.

How do I get to RAID configuration utility?

To View the Event Log

  1. Start the BIOS RAID Configuration utility. See To Start the BIOS RAID Configuration Utility.
  2. Select the HBA you want, then press Enter.
  3. When the BIOS RAID Configuration utility menu is displayed, then press Ctrl+P.
  4. Select Controller Log Information, then press Enter.

How can I tell if I have RAID?

5 Answers

  1. Rick click on the “computer” icon on the desktop or the computer item in the Start Menu.
  2. Select Manage.
  3. Expand Storage.
  4. Click on Disk Management.
  5. In the bottom center pane you’ll see Disk 0, Disk 1, etc.
  6. On the left column under the Disk number you’ll see the word Basic or Dynamic.

How do I set up raid on my HP ProLiant dl380 G7?

When the HP Proliant DL380 G7 boots up the only displayed BIOS options are F9 for Setup, F11 for the boot disk menu, but neither other these take you to the RAID setup. To get to the RAID setup options, when the screen appears showing the F9 and F11 options press F8 every second or so, and you’ll first get the ILO configuration.

How do I get to the RAID setup options in Windows?

To get to the RAID setup options, when the screen appears showing the F9 and F11 options press F8 every second or so, and you’ll first get the ILO configuration. Exit ILO, and next you’ll get the RAID configuration options.

How to create a logical drive in Windows 10 with raid?

First from the ILO settings, Exit from the File menu: After exiting ILO you get the RAID controller options – press F8 for the Arrays Utility: Now in RAID settings, create your Logical Drive from your available physical drives: Here I have added 2 500GB drives to a RAID 1+0 array: