Is it difficult to sand hardwood floors?

If the scratches don’t go all the way through to the wood, you can scuff-sand your floors with a buffer and apply a fresh coat or two of finish. The hardwood floor refinishing process is easier and less expensive than sanding down to bare wood and takes less time. In a few hours, your floors will look as good as new.

What is the average cost to sand and refinish hardwood floors?

Nationally, the average cost for refinishing a hardwood floor is $1,761, within a typical range of $1,074 to $2,486. But there’s every chance your floor is anything but average, and your actual costs can vary depending on many factors, especially the availability and cost of labor in your area.

What kind of sander do you use on hardwood floors?

The drum sander is the real workhorse of hardwood floor sanding. It is a massive piece of equipment, too heavy for most people to lift—two people are required to carry it.

Should I sand my hardwood floors myself?

If this is your first time refinishing floors, you are probably better off hiring a professional to sand and refinish your floors. Not only will your floors look better and last longer, but they will be finished much faster if you hire a professional (so you can move in sooner).

Can I sand my hardwood floors with a hand sander?

The palm sander is definitely the most common tool for sanding a wooden floor by hand. Palm sanders also oscillate, however, unlike orbital random sanders, the pad of the palm sander is fixed straight.

Can you refinish a wood floor without sanding?

The best way to refinish wood floors without sanding is to use a technique called screen and recoat. This involves scuffing up the finish with a floor buffer and applying a refresher coat of finish. The former is a proven floor restoration method, while the latter is the “Hail Mary” pass of floor care.

Can I sand hardwood floors with a hand sander?

How much does it cost to refinish a hardwood floor?

If your hardwood floors are dull, scratched, and looking old, it’s probably time to refinish them. According to HomeAdvisor, the typical price range to refinish hardwood floors is between $1,074…

How to sand hardwood floors?

Determine your grit sequence. Did you know that refinishing a floor means that you’ll sand over your floor multiple times?

Sand all the main field areas with the drum sander using your pre-determined starting grit.

Use the edger (using the same grit you just used on the drum) to sand all the areas that the drum couldn’t reach.

Sweep or vacuum all sanded rooms. Every time you finish a grit you need to vacuum,or at least sweep all the surfaces you just sanded.

Sand all main field areas with the drum sander on the next grit in the determined sequence.

Use the edger (using the same grit you just used on the drum) to sand all the areas that the drum couldn’t reach.

Repeat steps 4 through 6 until you have sanded the entire floor through 80grit.

Use a radiator edger to sand under all radiators or toe-kicks if you have them.

Scrape or sand all corners and around radiator feet or pipes.

Examine perimeter of all rooms and remove any visible edger swirl by hand-sanding.

Use a pole sander or a buffer over the entire floor at 100 or 120 grit to blend the straight sanding cut from the drum with the circular

Vacuum the entire area thoroughly. Vacuuming twice never hurts and usually helps. Getting all the dust off is more important than we can ever say.

How to refinish hardwood floors?

Prep the Room. Remove all furniture,window treatments and rugs.

Patch and Repair. Check the floor for larger holes or cracks and repair using wood filler and a spackle knife.

Sand the Floor.

Buff the Floor.

Prep for Sealer or Stain.

Apply Stain (Optional) The bare floor is now ready for either stain or sealer.

Seal the Floor.