What is ASTM A487 Gr CA6NM?
ASTM A487 Grade CA6NM Class A, Heat-Treated
| Unit | Property Name | Value |
|---|---|---|
| GPa | Elastic modulus | 220 |
| MPa | Tensile strength | 760 |
| MPa | Yield Strength Rp0.2, short transverse | 550 |
| g/cm³ | Density | 7.6 |
What is CA6NM material?
Type CA6NM is an iron-chromium- nickel-molybdenum alloy that is hardenable by heat treatment. It is similar in general corrosion resistance to type CA15, but the addition of nickel and molybdenum to the CA6NM composition improves its resistance to attack by sea water.
What is CF3M material specification?
Stainless Steel SA-351 CF3M is a molybdenum bearing modification of CF3 Austenitic Steel alloy and is the cast equivalent of wrought AISI 316L stainless steel. It is the low-carbon modification of CF8M. The presence of molybdenum increases the general corrosion resistance and the resistance to pitting by chlorides.
What is CA15 material?
SS410 is a Martensitic stainless steel with corrosion resistant property. The casting grade is named as CA15 (J91150) in standard of ASTM A743/A743M and ASTM A217/A217M and ASTM A487/A487M only. It’s a cheap stainless steel with good hardness.
Is CA6NM stainless steel?
ACI-ASTM CA6NM steel is a martensitic stainless steel formulated for casting. Cited properties are appropriate for the heat treated (HT) condition. CA6NM is the designation in both the ACI and ASTM systems for this material.
What is A487?
Roads in the United Kingdom The A487, officially also known as the Fishguard to Bangor Trunk Road, is a trunk road in Wales, that follows the coast from Haverfordwest, Pembrokeshire, in the south, to Bangor, Gwynedd, in the north.
What is ASTM A 743?
ASTM A743 CA6NM alloy is a martensitic stainless steel typically used in energy industry -runners and hydraulic turbine components- due to its superior toughness, yield and fatigue properties. In both the manufacturing, shielded metal arc welding is applied to join for this grade steels.
What is difference between CF3 and CF3M?
CF3M has molybdenum but CF3 don’t contain it. CF3(SS304) is an Fe-Cr-Ni alloy that is the cast equivalent of wrought, low carbon, AISI 304L /F304L stainless steel. The low carbon content of the alloy results in greater resistance to sensitization of the welds.
Is CF8 the same as 304?
Stainless Steel SA-351 CF8 is the cast equivalent of Type 304 Stainless Steel, part of a range of austenitic chromium-nickel alloys that provide good strength and ductility. They are also known as 18/8 stainless due to their chemical composition which includes approximately 18% chromium and 8% nickel by weight.
What is ss410?
SS 410 is a heat treatable martensitic chromium stainless steel. Melt practice is controlled to develop a surface nearly free from defects. It provides the best combination of wear resistance and corrosion resistance, and is used in demanding medical accessories.
What is f6 material?
ASTM A182 F6a is a forged martensitic stainless steel with 13 wt. % chromium. Martensitic stainless steels can be high-carbon or low-carbon steel alloys.