What is the number on the Scotts spreader for lime?
Pelletized lime should be applied every other year (approximately 15 lbs./1,000 ft²) once you have your soil pH to its optimum level, which is between 6.0 and 6.5….Lime.
| Spreader | Setting |
|---|---|
| Central Quality (Broadcast) 600B, 700, 100A | 7 |
| Central Quality (Drop) 175, 185, 205 | 12 |
| Scotts (Drop) | 11.5 |
| Scotts (Broadcast) | J |
What should I set my spreader for lime?
To spread Soil Doctor brand pelletized lime, set a broadcast spreader to two-thirds open, or a drop spreader to one-third open, or equivalent.
Can I use a spreader for lime?
A spreader is the best tool for applying lime. Apply half of the recommended amount of lime by walking back and forth horizontally with the spreader, then add the second half by walking vertically. This way, your criss-cross pattern ensures the grass is evenly and completely covered.
Can too much lime burn your grass?
Not only does lime not kill grass, it can benefit lawns and pasture. Use too much lime will damage grass but when you apply lime properly it corrects the imbalance of acidity in your soil creates the optimum pH level and increases the ability of your grass to access nutrients composition.
How much pelletized lime should I use on my lawn?
Pelletized lime is approximately 35 percent calcium by weight, so a generous application would be 6 pounds of pelletized lime per 1,000 square feet.
What should I set my fertilizer spreader to?
Set your spreader so that it’s ¾ open when engaged. If, for example, the spreader is calibrated 1 to 20, set it at 15. Place eight pounds of Milorganite into the spreader’s hopper. This is about one-fifth bag, or 8 lbs., of Milorganite, which is equivalent to 24 cups.
What is setting for lime pellets with the Scotts standard broadcast spreader?
What is setting for lime pellets with the Scotts Standard Broadcast Spreader? Depending on how much lime you wish to spread on your lawn or garden, the setting will vary. To achieve an application rate of 1.75 lbs. per 1000 square feet a setting of 3 is used.
What are the spreader settings for scotscotts broadcast spreader?
Scotts Broadcast Spreader Settings for Lime One easy way to control lime application is by covering a spreader hole until only the 1/3rd part of it is open. Lime adds minerals to the soil and, if applied unbalanced, can wreak havoc on plant growth. Spreader Settings for 10-10-10, 13-13-13, and Lesco Fertilizer
How do I Change my spreader settings in Scotts® Turf Builder®?
1 Click here for the Scotts® Turf Builder® Lawn Food product page. 2 Click on the category (Feed & Control Weeds, Feed Any Season, Feed & Control Bugs, etc.). 3 Click on the Details and Usage tab. You’ll find your spreader settings there. 4 Or, visit the spreader settings tool.
How much lime do you put in a spreader?
An application rate of 2.25 lbs. for the same area requires a setting of 3.5 and 3.5 lbs. per 1000 square feet can be reached with a setting of 4. While it is not exact these settings will provide a general guide when applying powdered or pelletized lime using most Scotts Spreaders.