How do I get the center console off my Silverado?

Reach under the dash and grasp the very front of one side of the center console. Give the panel a quick tug to remove the trim panel. Repeat this for the other side of the center console. Pry around the edges of the top bezel.

Can you add center console to Silverado?

Yes, you can replace the entire center console in your Silverado if you want. This process is relatively labor-intensive, but the end result is a brand-new console thats free from any damage.

How do I remove the center console on a 2021 GMC Sierra?

How to Remove the Center Console on a GMC Sierra

1. Open the rear cup holder on the console and pull it out all the way.
2. Grab on either side of the center pocket of the console and lift it up with your hands.
3. Locate the four bolts that hold the console to the floor.

Which Silverado models have a center console?

WT and LS models include a 3.5-inch driver information center display in the middle of the instrument cluster. LT, LTZ, Z71 and High Country models include a 4.2-inch color driver information center display.

How do you take the jump seat out of a Chevy Silverado?

Silverado Center Jump Seat Removal Guide

1. Pull off the sill plate trim panels on the outside of both seats with your hands.
2. Tilt the driver’s seat forward and unplug the wiring on the bottom of the seat with your hands.
3. Unbolt the passenger’s seat using the 3/8-inch ratchet and specialized socket.

How do I remove center console from 2021 Silverado?

Removal Procedure

1. Locate and loosen the nuts underneath the driver’s side and passenger’s side seats with your wrench.
2. Once they’re loose, lift the seats off of the studs holding them in place and remove them from your Silverado.
3. Locate the front tray directly underneath the instrument panel and remove it.

Is the Silverado getting a new interior?

2022 Chevrolet Silverado Gets New Interior, ZR2 Off-Road And Super Cruise. In early 2022, Chevrolet will be launching a refreshed Silverado that features a massively upgraded passenger environment on most models, hands-free Super Cruise driving assist and a ZR2 off-road version.

How to remove the center console on a Chevy Silverado?

How To Remove Your Silverado’s Center Console 1 Tools Required 2 Removal Procedure. Locate and loosen the nuts underneath the driver’s side and passenger’s side seats with your wrench. 3 Installation Procedure. Place the console back in its original position, and insert the screws into their appropriate places.

How do you remove the front seats on a Chevy Silverado?

Once they’re loose, lift the seats off of the studs holding them in place and remove them from your Silverado. 3. Locate the front tray directly underneath the instrument panel and remove it. The tray should budge just by using your hands. 4.

How do I replace the front seats and the console?

Place the console back in its original position, and insert the screws into their appropriate places. 2. Reposition the console trim and secure it in place. 3. Reconnect the wiring harness and replace the front tray underneath the instrument panel. 4. Place the front seats over the studs, and apply the nuts on all corners of the seat base.