Do you need 3/8 drive sockets?
If your socket set is limited to one drive size, choose 3/8-inch drive to cover the majority of sockets you will use. The smallest and largest drive sizes are very useful too, though. Small, ¼-inch drive sockets can sometimes reach small nuts or bolts in tight spots more easily.
What is a 3/8 drive socket?
3/8 inch – The middle sized, and in my opinion, most useful size for general use on a car. A 3/8″ drive can drive sockets of all sizes. It is big enough to apply quite a lot of force, but not too big to fit into tight spaces. 1/2 inch – 1/2″ sockets are generally used for nuts and bolts from around 10mm and up.
Are GREY pneumatic tools any good?
Grey Pneumatic is known for their reliable and durable impact sockets. The sockets, made from steel alloy material, are super resistant to cracking or shattering, and meet OSHA safety standards. GP impact sockets with a hex extension bit are one piece impact hex drivers, available in metric and fractional sizes.
Does GREY pneumatic have lifetime warranty?
Grey Pneumatic tools carry a lifetime warranty against defects in materials and workmanship.
How much torque can 3/8 drive handle?
If you assume a reasonable quality tool steel that can handle 100K psi, a 1/4″ drive can take about 30 ft-lb, 3/8″ about 100 ft-lbs, 1/2″ about 230 ft-lbs, and 3/4″ about 800 ft-lbs.
How much torque can a 3/8 ratchet handle?
The maximum recommended torque for a 3/8 in. ratchet handle is 1800 lbs.
What is a 3/8 socket in MM?
SAE to Metric Conversion Chart
| SAE | Metric | Inch |
|---|---|---|
| 3/8″ | 0.375 | |
| 10mm | 0.394 | |
| 13/32″ | 0.406 | |
| 11mm | 0.433 |
What sizes are in a 3/8 socket set?
SAE to Metric Conversion Chart
| SAE Size | Metric Size | Inches Decimal |
|---|---|---|
| 3/8″ | 0.375 | |
| 10mm | 0.394 | |
| 13/32″ | 0.406 | |
| 11mm | 0.433 |
Where are sunex tools made?
These Sunex impact sockets are made in Taiwan of Cr-Mo, which is considerably stronger than Cr-V. I’ve been using these sockets with my Milwaukee FUEL impact and they can take the torque with no with problems.
What is Duo socket?
The thin wall design of chrome hand sockets are combined with the strength and durability of Grey Pneumatic impact sockets to create the Duo-Socket. This 59 piece set is built specifically to address the needs of the professional technician using hand tools, cordless impact tools and air tools.
How much force can a ratchet take?
Working Load Limit (WLL): Typical ratchet unit with 2-inch wide webbing and twin hooks has a WLL of 3,330 pounds at a 3:1 safety ratio. Standard Hand Force: The pulling force that can be generated by one person on a ratchet device using only hand power is approximately 1,181 pounds.
How much torque can you generate with a breaker bar?
At more than 3 feet long, a 40-inch breaker bar can produce a staggering 1,000 foot-pounds of torque. If a nut won’t come off under the pressure of a 40-inch bar, then it will probably need to be cut off.
How many pieces are in a 3/8 drive socket?
Set Contains 9 Pieces | 3/8″ Drive 9 Pc. Magnetic Impact Socket Set View product details. View product details. View product details. View product details. Set Contains 12 Pieces | 3/8″ Dr. 12 Pc. 6 Pt.
Who is GP sockets?
GP is a Manufacturer of Impact and Specialty Sockets Don’t settle for low quality imported sockets and tools. Grey Pneumatic (GP), through our distributors, supplies the world’s automotive, industrial, assembly, mining, maintenance, construction, and energy industries with heavy duty, high quality, impact and specialty sockets.
How many pieces are in a plug socket set?
Pipe Plug Socket Set View product details. Set Contains 9 Pieces | 3/8″ Drive 9 Pc. Deep Magnetic Impact Socket Set View product details. Set Contains 9 Pieces | 3/8″ Drive 9 Pc. Magnetic Impact Socket Set View product details.
What size impact sockets do you offer?
We carry a complete line of impact socket sets as well as individual sockets from 1/4″ – 2-1/2″ and #5 spline drive with hex sizes up to 8″. We also offer a large selection of star impact drivers, impact hex drivers, triple square drivers, and torque limiting sockets.