What does 10-4 mean and why?
10-4 is a way of saying “message received” in radio communications. It’s also used as a way to “you got it.”
What are walkie talkie privacy codes?
Privacy codes are based on the CTCSS or DCS codes capability of two-way radios. A receiving radio that has a privacy code set will not un-mute its speaker unless that code is sent along with a transmission. So if a receiving radio is set to channel 2 and privacy code 5.
What are the 10 codes in radio?
Walkie Talkie “10 Codes”
- 10-1 = Receiving poorly.
- 10-2 = Receiving well.
- 10-3 = Stop transmitting.
- 10-4 = Message received.
- 10-5 = Relay message to ___
- 10-6 = Busy, please stand by.
- 10-7 = Out of service, leaving the air.
- 10-8 = In service, subject to call.
What is Channel 19 on a CB radio?
Most truckers use the unofficial channel 19 (27.185 MHz) to communicate. This channel offers highway traffic information from truckers and other drivers.
What does a 10 5 mean?
10-3 Stop transmitting. 10-4 Acknowledgement (OK) 10-5 Relay. 10-6 Busy–stand by unless urgent. 10-7 Out of service.
What’s your 20 definition?
What’s your 20? is CB (Citizens Band radio) lingo for “What’s your location?” What’s your 2020 can be part of a question about a person’s presidential aspirations for the 2020 election or about a person or organization’s goals or aims for the year 2020.
What does CTC mean on walkie talkie?
In telecommunications, Continuous Tone-Coded Squelch System or CTCSS is one type of in-band signaling that is used to reduce the annoyance of listening to other users on a shared two-way radio communications channel. (See squelch.) It is sometimes referred to as tone squelch.
What is an interference eliminator code?
Interference Eliminator Codes help minimize interference by blocking transmissions from unknown sources. Your radio has 121 Interference Eliminator Codes.
What are the Radio 10 codes?
Ten-codes, also known as 10-codes or ten signals, are code words used by many police officers to aid with voice communication. The codes were originally developed in 1937 to allow for brevity, clarity, and standardization of messages transmitted over radio channels.
What is Radio 10 code?
10-1 Receiving Poorly
What are the CB – 10 codes?
CB Radio Lingo / CB Codes 10-1 Receiving Poorly 10-2 Receiving Well 10-3 Stop Transmitting 10-4 Ok, Message Received 10-5 Relay Message 10-6 Busy, Stand By 10-7 Out of Service, Leaving Air 10-8 In Service, subject to call 10-9 Repeat Message 10-10 Transmission Completed, Standing By