Can glass blowers fix Bongs?

Our team of blowers will always try their best to repair each bong or rig we receive, with love and attention to detail, but there are unknown unknowns that we can not foresee. The good news is we are over an 80% success rate, which is very high for the glass bong or water pipe repair industry.

Can blown glass be repaired?

If you’ve invested in a beautiful piece of glass art you want to take every precaution to make sure it is safe from damage. But sometimes, despite even the best of efforts, you may find yourself in need of fine glass repair.

Can you fix a broken glass bubbler?

Use food-grade silicone to repair cracks, chips, and other minor damage to your bong. If there’s a clean-cut piece of glass that busted off, you may be able to stick it back together with silicone. Just don’t expect to stick a bunch of broken pieces together with it.

Can I get my bong repaired?

We can repair *MOST* bongs. If your bong has thermal decals or stickers affixed to it ,there is a chance they could burn off in the kiln during the repair process. If for some reason, your glass piece cracks or shatters when we are trying to fix it we will give you 50% of what you paid back in store credit.

Can a broken glass pipe be fixed?

On the other hand, if there is a crack, there are some methods you can use to fix your broken weed pipe. Use Epoxy: a two-component epoxy is perfect for sealing, coating, and bonding substances. In case your pipe has a clean-cut piece of glass that busted off, food grade silicone can help you stick it back together.

Will Super Glue work on glass?

Super glue, or Cyanoacrylate, is an adhesive that’s used in a huge variety of applications on a wide variety of substrates. This non-hot melt adhesive is a great candidate for glass substrates due to its strong, clear and waterproof bond.

Can you glue blown glass?

Place the broken piece of glass on the epoxy glue making sure to match the edges of the break. Hold the broken section in place for the time indicated on the epoxy glue’s instructions. Different manufacturer’s recommend a different length of time for the epoxy to set. Times will vary from one to three minutes.

Can you glue a glass pipe back together?

Use Epoxy: a two-component epoxy is perfect for sealing, coating, and bonding substances. Moreover, you will put your health in a safer place if you use food-grade epoxy, just to avoid toxic fumes. In case your pipe has a clean-cut piece of glass that busted off, food grade silicone can help you stick it back together.

How do you melt glass back together?

Hold the broken edge of the glass pipe above the flame, then carefully lower the glass so that it’s inside the flame. Hold it there until you notice the glass begin to melt or bend. If necessary, heat the other piece of broken glass to smooth out any broken edges.

How do you fix a broken bong stem?

For food-grade epoxy, you should make sure that you have smooth, clean edges near the break. If there are jagged edges, you may want to smooth them using a file. Then, you can rub them against fine sandpaper to further smooth them down. Wipe off any remaining dust from the stem.

What do you do with a broken bong?

When a piece is completely shattered, a buyer’s best bet is to contact the artist directly, keeping in mind that the fault of break often contributes to the artist’s willingness to help. An unfixable piece is hard to recover, but you can start the reparation process by determining its market value.