How do you adjust the TPMS on a 2014 Silverado?

2014-2018 Models

1. Press and hold the TRIP knob until the horn sounds twice.
2. Start from the driver side front tire, place the TPMS Relearn Tool against the tire sidewall, near the valve stem.
3. Repeat the process for the passenger side front tire, passenger side rear tire, and the driver side rear tire.

How do you reset the tire pressure sensor on a Chevy 2500?

Turn your vehicle’s key to the “On” position without starting the vehicle. Push the TPMS reset button until the tire pressure light flashes three times, then let go. Start the car and wait for about 20 minutes for the tire pressure sensor to refresh.

What parameters should I set my TPMS at?

The recommended high-pressure alarm should be set at 20% above your normal tire pressure you typically run in your tires. The low-pressure alarm should be set at 10% below your normal tire pressure.

What should the tire pressure be on a 2014 chevy silverado?

The proper tire pressure for a 2014 chevy silverado is 35 psi for all four tires.

How do you adjust the tire pressure sensor on a Chevy Silverado?

Turn the ignition to ON/RUN with the engine off. Use the MENU button to select the Vehicle Information Menu in the DIC. Use the thumbwheel to scroll to the Tire Pressure Menu Item screen. Press the SET/CLR button to begin the sensor matching process.

What is the tire pressure for a Chevy Silverado?

35 PSI
You will find the specific tire PSI for your Silverado in the door of the truck. Typically, your truck tires should be at 35 PSI in the front and the back. It’s recommended you check your tire pressure once a month.

How do you reset the tire pressure monitoring system on a Chevy Silverado?

Turn vehicle to ON/RUN. Push the trip odometer reset stem until Tire Pressure is displayed. Push and hold trip reset stem to begin the sensor matching process. Push trip reset again to confirm.

How do I set my TPMS to any pressure?

Using the left, right and center buttons, set each tires baseline to the desired pressure. Once all tires have the correct baseline pressures, press and hold the center button for 5 seconds until you hear a beep. You are now back in Monitoring Mode.

What PSI should Silverado tires be at?

What is the recommended tire pressure for a 2013 Chevy Silverado?

Recommended tire pressure for 2013 Chevrolet Silverado 2500 HD is 50 psi to 65 psi for front tires and 70 psi to 80 psi for rear tires. Recommended tire pressure for 2012 Chevrolet Silverado 2500 HD is 50 psi to 65 psi for front tires and 70 psi to 80 psi for rear tires.

What is the recommended tire pressure for 2021 Chevrolet Silverado 2500 HD?

Select Chevrolet Silverado 2500 HD year to see its original equipment tire sizes and corresponding tire inflation pressures. Recommended tire pressure for 2021 Chevrolet Silverado 2500 HD is 60 psi to 65 psi for front tires and 70 psi to 80 psi for rear tires.

How do I reset the tire pressure on a Chevy Silverado?

Reset the Tire Pressure Monitoring system on your Silverado without a trip to the dealership – By Dan Rosales. 1. Turn ON the ignition, with the engine OFF. 2. Apply the parking brake. 3. Using the DIC, press the vehicle information button until the RELEARN TIRE POSITIONS message displays.

What is the recommended tire inflation for Chevrolet Silverado 2500 HD custom?

Recommended tire inflation for Chevrolet Silverado 2500 HD Custom is 60 psi for front tires and 70 psi for rear tires. Recommended tire inflation for Chevrolet Silverado 2500 HD Custom Snow Plow is 75 psi for front tires and 75 psi for rear tires.